A660 Ride On Scrubber Machine

Sticky residue on warehouse floors. Scuff marks ground into mall corridors by lunchtime. When your cleaning crew spends more time wringing mops than covering ground, the operation needs a machine that keeps up. The A660 ride on scrubber scrubs, recovers dirty water, and leaves floors dry in a single pass across epoxy, PVC, marble, and most hard surfaces.

A & A Enterprises stocks this unit at our Al Qusais warehouse in Dubai, ready for a same-week walkthrough or on-site demo. Call our team on +971 528063010 for pricing or a quote tailored to your facility size.

Built for Facilities That Run Long Shifts

The A660 ride on scrubber pairs a 90 L clean water tank with a 110 L recovery tank. That ratio matters. Operators spend less time emptying dirty water and more time covering floor area, because the recovery tank holds more than the solution tank feeds. A 24V/150Ah battery powers the unit for up to 4 hours of continuous scrubbing, enough to finish a full shift in most mid-sized commercial or industrial spaces without swapping batteries or stopping to recharge.

A 660 mm cleaning width sits in the sweet spot between agility and coverage. The machine fits through standard doorways and between racking aisles while still clearing open floor at a pace that manual mopping never matches.

A660 Ride On Scrubber Specifications

Cleaning width

660 mm brush path. Wide enough for open warehouse bays, narrow enough to navigate corridors, retail aisles, and hospital hallways.

Battery

24V/150Ah maintenance-free battery. Delivers up to 4 hours of uninterrupted operation on a full charge.

Clean water tank

90 L capacity. Enough solution to cover large floor areas before the operator needs to refill.

Recovery tank

110 L capacity. The larger recovery tank means fewer dump cycles and longer uninterrupted runs.

Operator position

Ride-on with seated operator. Reduces fatigue on shifts that stretch past the two-hour mark.

Floor compatibility

Epoxy, PVC, marble, terrazzo, and other hard floor types.

Where the A660 Performs Best

Facility managers in workshops, manufacturing plants, shopping malls, hotels, and hospitals get the most from this machine. Any space with 1,000 sqm or more of hard flooring and daily foot traffic benefits from a ride on scrubber over walk-behind alternatives or manual mopping.

Hotel lobbies and hospital corridors demand trace-free results. The A660 scrubs and vacuums in one pass, leaving floors dry enough for immediate foot traffic. In workshop and warehouse settings, the sealed recovery tank captures oily residue and fine grit that mops push around rather than remove.

How This Ride On Scrubber Works on Site

An operator fills the clean water tank, selects the brush pressure and water flow from the intelligent operation panel, and drives. The front-mounted brush disc scrubs the surface while the rear squeegee and suction system pull dirty water into the recovery tank. Floors dry within seconds.

Anti-skid wheels keep the machine stable on wet surfaces and across slight inclines. Low-noise motors let the unit run during business hours in retail and hospitality settings without disrupting customers or guests.

When the shift ends, the operator drains the recovery tank, rinses the squeegee, and parks the machine on charge. No complicated teardown, no specialist maintenance between shifts.

Why Facility Managers Choose A & A Enterprises

Our equipment specialists walk you through every machine before it leaves the warehouse. That means your operators see the controls, practice filling and draining the tanks, and understand the daily maintenance steps before the A660 reaches your site.

We stock scrubbers, sweepers, and pressure washers at our Al Qusais facility in Dubai, so lead times stay short. Our engineers handle after-sales support, spare parts, and warranty service directly, with no third-party runaround.

Need to compare options? The A650R ride on scrubber shares a similar tank setup in a different chassis, while the A500 walk-behind scrubber suits tighter spaces where a ride-on footprint is too large. Our team helps you match the right machine to your floor area and shift pattern.

Frequently Asked Questions About the A660

How long does the A660 ride on scrubber run on a single charge?

The 24V/150Ah battery delivers up to 4 hours of continuous operation. Actual runtime depends on floor condition, brush pressure, and water flow settings. Our support team reviews your expected shift length and recommends a charging schedule during setup.

What floor types does this machine handle?

The A660 works on epoxy, PVC, marble, terrazzo, and other sealed hard floors. Skip carpet, unsealed concrete, and heavily cracked surfaces.

Where is A & A Enterprises located?

We operate from Office G-1, Warehouse 7B, Industrial Area 1, Al Qusais, Dubai. Walk-ins are welcome for machine demos, and we arrange delivery across the UAE. Call +971 528063010 or visit our contact page to book a time.

Get a Quote for the A660 Ride On Scrubber

The fastest way to get pricing is a direct call to our Dubai team on +971 528063010. Share your facility size and floor type, and we put together a quote that covers the machine, delivery, and operator training. If you want to see the A660 run before you commit, book a warehouse demo or request an on-site trial at your location.